Unplug the power cable from the outlet. Locate the cable that runs from the back of your cable box to the wall outlet. While your cable box is still on, pull the plug out of the wall to disconnect it from power. Check the front of your cable box to make sure the display turned off. The DCT700 box is a regular digital box. This video has no affiliation with Cable Bahamas.
If you are experiencing performance problems with a DCT700 cable box, a reset, also known as a 'cold initialization,' could solve the issue. A reset has to be done with the DCT700's remote because the box has no front-panel buttons. The process resets the box's flash memory, erasing everything except the firmware.
How To Unlock Motorola Dct700 Cable Box Model
Hold down any button on the remote control, then disconnect and reconnect the power cord. Wait for the box to reboot.
Press the '3' key when the 'Power' LED light on the front of the box begins flashing. You must press '3' within three seconds. How to play diablo 2 without disc. You'll know you have timed it correctly when the LED light flashes at a slower rate.
If you are experiencing performance problems with a DCT700 cable box, a reset, also known as a 'cold initialization,' could solve the issue. A reset has to be done with the DCT700's remote because the box has no front-panel buttons. The process resets the box's flash memory, erasing everything except the firmware.
How To Unlock Motorola Dct700 Cable Box Model
Hold down any button on the remote control, then disconnect and reconnect the power cord. Wait for the box to reboot.
Press the '3' key when the 'Power' LED light on the front of the box begins flashing. You must press '3' within three seconds. How to play diablo 2 without disc. You'll know you have timed it correctly when the LED light flashes at a slower rate.
How To Unlock Motorola Dct700 Cable Box To Magnavox Tv
Press the '2' button within three seconds of the LED light flashing at a decreased rate. You know you have timed it correctly when the light flashes at a faster rate.
Press the '8' button within three seconds of the LED light flashing at an increased rate. At that point, the box should reset itself.
Warnings
If you do not press the correct button in time, the reset procedure cancels and the box will resume normal operation.
References
Just wondering if anyone else has had this issue..
My parents have Verizon FiOS and they went all-digital last summer. As part of the deal, we got 2 'digital adapters' (Motorola DCT700 STBs) free, for our 2 analog TVs that we had connected.
Everything works great until, when there's a blip in the power or something similar and then they stop responding. The full-size SD boxes (Motorola QIP2500) work fine, it's just the two DCT700 mini-boxes that have problems. And unplugging them isn't enough to cure it, when the problems occur, Verizon Support has to force a reset and then push a firmware reload which fixes the problem.
Symptoms:
-Box turns on but there's no OSD for what channel you're on
-When it's turned off, the audio goes away, LED goes out, but picture keeps playing
-It can't be turned back on, the channel won't change, and it seems unresponsive to any/all commands
-If it's unplugged for 10 seconds, it 'reboots', works properly for one on/off cycle, then goes unresponsive again.
Anyone got suggestions why this has happened multiple times, and how to prevent it? Verizon doesn't know and just says 'it shouldn't happen again' and I'm out of ideas.